Video answer: Epson inkjet printer rejecting printer cartridges? try this!
Top best answers to the question «How do i get my epson printer to recognize compatible cartridges»
Override 'Epson Ink Cartridge Not Recognized'
To clear it, remove all the ink cartridges and restart the printer. That clears out the memory and gives you a "no cartridges installed" error. At this point, you can reinstall your cartridges, and unless there are other issues, your printer should recognize them.
- Install non-OEM cartridge early…
- Put the OEM cartridge back and use on-screen prompt to change cartridges.
Remove all of the new cartridges you had installed and re-install the old (empty) cartridges that worked. Restart the printer, this should remove the not recognised error (and tell you some are empty) Install one of the new cartridges. Keep installing the new cartridges one-by-one until the error returns.
- Make sure the cartridge chip is clean, free of ink smear and debris.
- Make sure the printer's contact pin is clean, free of ink smear and debris.
- Verify that the cartridge is seated in the printer securely. Push it down hard until you hear a click.
Video answer: Epson cannot recognise a cartridge:16 ways to solve the .
9 other answers
Open the lid and hold the ink button down. When the ink holder moves to its position, open the lid of the cartridge that doesn’t have ink, and again close it even without removing the cartridge. Now close the lid and start printing. Why does my Epson printer say Cannot recognize ink cartridge?
When your Epson printer doesn't recognize a new cartridge, your first step should be to click OK or Accept on the error message and try again. If the error shows up on the printer's screen, use the built-in navigation keys to do the same. Sometimes, the printer works afterward, but often you need to try a few more steps.
Power on the printer. Open the cartridge cover or control panel cover on the Epson printer according to the directions in the user guide or manual. Wait for the cartridge cradle to slide to the...
Epson Printer Doesn’t recognise a new cartridge . Remove the unrecognised ink cartridge and reinstall. This is to ensure it has clicked in place properly. If this doesn’t work, remove and inspect the cartridge chips. Clean away any dirt or ink that may be preventing it from being recognised. Refit and check if this has solved the problem.
Verify that the cartridge is seated in the printer securely. Push it down hard until you hear a click. Once it is inside, wiggle it with your finger back and forth. If the cartridge seems to be loose, insert folded paper to the back and thus push the cartridge forward to have good contact with the printer.
Try replacing the old cartridge with the new one and see if the printer will recognize the cartridge. If that doesn't work, remove the new cartridge and place it in a safe place and surface so there won't be further damage. Turn off the power and unplug the printer from the outlet and let it sit for 10 or so minutes.
A clone cartridge is a type of third-party ink cartridge that uses an identical chip to the original ink cartridge. However, sometimes the Epson printer does not recognize the cloned ink cartridge. Install your cloned ink cartridge into the Epson printer. Go to "Start > Control Panel" on your computer.
Here are some of it:Start by installing the cloned ink cartridge, and automatically the printer will issue a prompt “an ink cartridge cannot be recognized”.Proceed to “Start”, then “Control Panel” on the computer and double click on the “printer”.Look for the icon on the “Epson Printer” and right press and select “Printer Preferences”, regularly found at bottom of the dialog box.Click on the tab showing “Speed and Progress” and look at the Epson Printer monitor ...
Wait for 3-4 minutes and switch the printer back up. This will usually allow the printer to access the extra ink, however some printers are set by the manufacturer to still not recognise the extra ink and there no way of knowing which printers this affects.